Oil Conditioning Systems: Model DOC-N25-PEOil Conditioning Systems:
Model DOC-N25-PE

Designed for volumes less than 2,550 gallons, Model N25, phosphate ester based, electrostatically cleans lubricants of contaminants while eliminating the need for mechanical filters. It circulates oil at a very low velocity, removing submicron particles and large contaminants from hydraulic fluids and lubricating oils.

Model DOC-N25-PE Spec Sheet (PDF)


  • NEMA 4 rating
  • Good for oil reservoirs to 2,550 gallons
  • Flow rate of 1.5 gallons/minute
  • Phosphate ester based


Flow Rate: 90 gph
(342 lph)
Max. Temp.: 140°F
Operating Temp.: 32°F-120°F
(-10°F-120°F with panel heater kit)
Max. H2O Content: 500 p/min
(options available for >500 p/min)
Electrical Rating: NEMA 4
Weight: 125 lbs (56.8 kg)
Weight (operating): 163 lbs (74.2 kg
Power Supply: 115 V/1PH/60Hz
640 Watts
(790 Watts with heater kit)
Voltage: 10-12 KVAC
Voltage Cut-Off: 3 KVAC
Cartridge/Set: 1
Collector Part #: 60-0518
Seals: Viton
Dimensions: w x l x h
15.75 in x 26.90 in x 30.38 in
40.00 cm x 68.3 cm x 77.10 cm
Replace Collectors: 1,000-3,000 + hours for typical use (less for
high load applications)
Change at least once a year for best

Order Kleentek
Brand Replacement Collectors

Don't take chances using "knock-off" collectors.

Only an authentic Kleentek electrostatic filter element lasts longer and offers the most in durability performance.

Order A Kleentek Collector by Calling 800.252.4647