Oil Conditioning Systems: DOC-N10-PEOil Conditioning Systems:
Model DOC-N10-PE

Designed for volumes less than 1,050 gallons, Model N10, phosphate ester based, electrostatically cleans lubricants of contaminants while eliminating the need for mechanical filters. It circulates oil at a very low velocity, removing submicron particles and large contaminants from hydraulic fluids and lubricating oils.

Model DOC-N10-PE Spec Sheet (PDF)


  • NEMA 4 rating
  • Good for oil reservoirs to 1,050 gallons
  • Flow rate of 30 gph
  • Phosphate ester based


Flow Rate: 30 gph
(114 lph)
Max. Temp.: 140°F
Operating Temp.: 32°F-120°F
Max. H2O Content: 500 p/min
(options available for >500 p/min)
Electrical Rating: NEMA 4
Weight: 115 lbs (52.3 kg)
Weight (operating): 140 lbs (63.6 kg)
Power Supply: 115 V/1PH/60Hz
640 Watts
(790 Watts with heater kit)
Voltage: 10-12 KVAC
Voltage Cut-Off: 3 KVAC
Cartridge/Set: 1
Collector Part #: 60-0516
Seals: Viton
Dimensions: w x l x h
13.75 in x 21.50 in x 21.50 in
34.90 cm x 54.60 cm x 54.60 cm
Replace Collectors: 1,000-3,000 + hours for typical use (less for
high load applications).
Change at least once a year for best

Order Kleentek
Brand Replacement Collectors

Don't take chances using "knock-off" collectors.

Only an authentic Kleentek electrostatic filter element lasts longer and offers the most in durability performance.

Order A Kleentek Collector by Calling 800.252.4647